6G Welding – Pays up to $ 1,000 per day (Do welding schools tell lies? How to become a pipe welder?)

How and why can pipe welding pay $ 1,000 per day?

Can any welder weld pipe? No. Pipe welding is extremely critical because if the welding is not done correctly, life, earth and the environment are at stake. Find out more about 6G welding and why it pays so well. And the reason the welding school industry prevents most welders from learning how to do it.

How can a pipe welder make $ 1,000 a day?

A highly experienced pipe welder who can weld rod (SMAW) and TIG (GTAW) pipes and who owns and operates his own welding equipment (a truck with a portable motor-generator welder) can earn up to $ 150 per hour . If a combination pipe deck welder works 14 hours and is paid $ 71.42 per hour – 14 x $ 71.42 = $ 1,000. And yes, these rare welders can make up to $ 300,000 a year.

The other side of that coin is another welder.

Think of the welder who has spent 6 months to two years in a university welding lab, and now finds himself going through days of robotic welding in a factory for as little as $ 80 a DAY. . They are both welders. What is the big difference?

The mystery and myth of welding:

Both examples of accomplished welders (above) have worked hard for their skills. The mystery is why one earns up to $ 1,000 per day while the other earns only $ 80 per day.

The myth is this: “Go to welding school and you will earn a living.” This myth is perpetuated by an industry that has not kept up. There are many reasons for this.

Welding Industry Myth Perpetual Reason # 1:

Schools and welding instructors know that if a traditional “chain of learning” is maintained, students must spend more time in school. To become a pipe welder, you need to learn basic welding in at least one process. To be a “Master Welder” much more schooling is required because the student must master several processes. Typically these include MIG, Stick, TIG, Brazing, Torch Cutting. Additionally (and along the way) welders are taught at least the basics of metal fabrication, metallurgy, and often plasma cutting.

All of this learning takes time and money – it’s “payday” for the welding instruction industry. Any shortcut is frowned upon as a “cheat”. Yet this “chain of learning is theft – stealing from welding students – and it has been going on for decades.”

Welding Industry Myth Perpetual Reason # 2:

The welding education industry doesn’t want you to know how low the salaries are for the skills they are teaching because they will lose students. The best aircraft TIG welders make a lot of money. These are structural TIG welders at a level that is difficult to achieve. However, few of these “top of the crop” TIG welders do what an average tube welder does (a welder, a tube welder without a truck or welder).

And the average TIG welder (who must still be an amazing TIG welder) will be offered $ 15 an hour in a factory … a very sad situation. Welding schools will point to pipe welding and say, “As soon as you have the structural certifications, you can go to pipe school, graduate, and earn big money.”

What they don’t tell you, you will be so exhausted with welding school, all the time, effort and money to get structural certifications, you will give up and get a $ 10 to $ 20 job. Often, there is no other option: students simply use up their money and MUST go to work.

Now, the above starting salaries for welders who have just finished school apply to welders who have had a “master welder” education. All that learning of all those processes and other skills still results in disgusting low pay!

Welding Industry Myth Perpetuation Ratio No. 3:

“You must get your structural certifications before you can attend pipe welding school.” This myth is partially true only because the welding school industry conspires to make it true. If you don’t have your structural certifications and you try to enroll in pipe welder school, you will be rejected. There may be some exceptions in the US, but not many. In other words, the basic schools of structural welding conspire with the schools of pipe welding to make this LIE a manufactured reality.

What they are NOT telling you:

THERE IS NO LAW that says you can’t learn to weld just by welding pipe! Imagine a school where you would be taught welding safety first. Next, you will learn how to correctly perform a bow. After that, you will master the laces on the floor. Immediately after that I would master the stringer cords at the 6G position on the pipe (the pipe is mounted at a fixed 45 degree position).

From that point on, I would ONLY place stringer cords into the pipe kit at a 45 degree angle.

Next, I would practice open root welding on the floor. As soon as you’ve lowered it, I’d practice the open root weld on the pipe at the 6G position. You would never weld anything on the floor again …

Once you have mastered the 6G Root Passes, you will learn the 6G Passes hot. After that, pass the 6G filler and after that, pass the 6G cap.

Lastly, the school would provide a Certified Welding Inspector (CWI) to test its best joint. If you pass, you’ll be ready to enter the high-demand, high-paying world of pipe welding.

What would be the total time elapsed without welding the pipe welder? About 3 months! Just think about it – you could go from no welder to pipe welder in a few months … NOT years!

Conclusion:

The USA may be the only country that does not have a set of laws regarding pipe welding. In other words, if you can do it, you can do it, and that’s it.

In most other countries (including Canada), you must successfully complete a long chain of classes and certifications BEFORE you can become a pipe welder.

In the US, if you can successfully pass a 6G welding test, you can find work as a pipe welder. Your first employer will ask you to work as a pipe welder’s helper so they can observe you and allow you to weld more and more slowly.

The reason for this is to make sure that you are not going to blow gaskets into the pipes; it simply costs too much to rework the joints. Your time as a helper can be short or long, depending on you, it could be a matter of weeks or months, but NOT years!

What should you do next?

Leave a Reply

Your email address will not be published. Required fields are marked *